Can I put solid hardwood in a historic Montgomery house?

Yes — this is one of the few places in our area where solid wood is genuinely the right call, because the houses are pier-and-beam with a real wood subfloor to nail into. The prerequisite is a dry crawlspace. If the ground under the house is exposed soil with no vapor barrier, moisture will drive up into the floor year-round and cup it no matter how well it was installed. We check that before quoting.

Why does my new acreage house need floor grinding before hardwood?

Custom slabs out here are often poured on ground that was cleared rather than engineered, and they cure with more variation across the surface than a production builder's slab does. Wood glued to an uneven slab bonds inconsistently, which shows up later as hollow-sounding boards and adhesive failure. Grinding the high spots and filling the low ones is a day of work that makes the difference between a floor that lasts and one that releases.

Hardwood Installation in Montgomery, TX

County: Montgomery County
Drive time from our base: Our home town

Free measure in Montgomery (713) 377-1303

What hardwood installation involves in Montgomery

Montgomery splits cleanly into two hardwood conversations depending on which side of town the house is on. In the historic district the houses are pier-and-beam with a wood subfloor, which is the one construction type in our whole service area where solid nail-down hardwood is genuinely the correct specification rather than a compromise. Those floors can be sanded for generations and they belong in those houses.

The catch is the crawlspace. Ground moisture drives the wood's equilibrium moisture content year-round, and a fair number of these crawlspaces have never had a vapor barrier laid. Installing a solid floor over damp exposed soil is throwing the material away — it will cup within the first humid season. We check crawlspace conditions and moisture-meter the existing subfloor before we will quote solid wood, and if the crawlspace needs a barrier we will say so even though it is not our scope.

On the other side of town — the newer acreage builds west toward Dobbin and the golf-course homes at Bentwater — it is slab construction, and there engineered plank glued down is the right answer. The specific issue on the custom acreage slabs is flatness: they are frequently poured on ground that was never properly prepared, and we routinely find more than a quarter-inch of variation that has to be ground or filled before wood goes down.

The job we run most here

Solid oak or heart pine nail-down in a historic-district home after confirming the crawlspace is dry — or engineered glue-down over a custom acreage slab that needs flattening first.

What it costs in Montgomery

Solid nail-down in a historic house runs $10–$18 installed. Engineered glue-down on the acreage slabs runs $9–$16, plus flattening where the pour came in out of tolerance, which on custom slabs out here is more often than not.

What’s included

Wood supplied and delivered ahead of the install date so it can acclimate in your house
On-site acclimation before installation
Moisture testing of slab and subfloor
Solid nail-down and engineered glue-down
Stair treads, risers, and custom nosing
Trim, transitions, and finish work

Materials we supply for this

Questions we get in Montgomery

Can I put solid hardwood in a historic Montgomery house?: Yes — this is one of the few places in our area where solid wood is genuinely the right call, because the houses are pier-and-beam with a real wood subfloor to nail into. The prerequisite is a dry crawlspace. If the ground under the house is exposed soil with no vapor barrier, moisture will drive up into the floor year-round and cup it no matter how well it was installed. We check that before quoting.
Why does my new acreage house need floor grinding before hardwood?: Custom slabs out here are often poured on ground that was cleared rather than engineered, and they cure with more variation across the surface than a production builder's slab does. Wood glued to an uneven slab bonds inconsistently, which shows up later as hollow-sounding boards and adhesive failure. Grinding the high spots and filling the low ones is a day of work that makes the difference between a floor that lasts and one that releases.

All areasHardwood InstallationThe full scope, materials, and gallery across every city we serve.All servicesFlooring in Montgomery, TXEverything we install in Montgomery, and what the housing stock here needs.