Skip to content

Now booking installs for next month — free in-home measure, no obligation.

Smith QualityFlooring

Hardwood Installation in Willis, TX

County
Montgomery County
Drive time from our base
20 min from our Montgomery crews

What hardwood installation involves in Willis

Hardwood is the least common request we get in Willis and the answer depends almost entirely on what kind of house it is. In a manufactured home, solid wood is effectively off the table — there is nothing appropriate to nail into, the deck moves, and moisture from below is a constant risk with a floor system that sits above open ground rather than a slab. Engineered plank can work as a floating installation over a properly sound deck, but at that point a good waterproof vinyl plank does the same job more reliably for less money, and we will usually say so.

Where hardwood genuinely belongs here is the site-built waterfront property around Seven Coves and Corinthian Point, and the better 1990s and 2000s subdivision homes. Those are conventional slab or joist construction and take engineered wood normally.

The waterfront houses do bring one specific consideration: proximity to the lake keeps ambient humidity elevated, and these are frequently second homes that sit closed up between visits with the air conditioning off. Wood responds to that. On a lakefront house that is not continuously conditioned we spec engineered rather than solid without exception, keep board widths moderate rather than wide, and make sure the material acclimates in the actual house rather than in a garage — because the conditions inside a closed-up lake house are what the floor has to live with.

The job we run most here

Engineered plank in a site-built Seven Coves or Corinthian Point waterfront home, specified narrow rather than wide because the house is not continuously conditioned.

What it costs in Willis

Engineered runs $9–$16 installed. In a manufactured home we will generally recommend waterproof plank at $5–$9 instead and explain why — it is a better floor for that structure, not merely a cheaper one.

What’s included

  • Wood supplied and delivered ahead of the install date so it can acclimate in your house
  • On-site acclimation before installation
  • Moisture testing of slab and subfloor
  • Solid nail-down and engineered glue-down
  • Stair treads, risers, and custom nosing
  • Trim, transitions, and finish work

Questions we get in Willis

Can I install hardwood in a manufactured home?
Solid hardwood, realistically no — there is nothing suitable to nail into, the deck flexes, and moisture from below is a live risk. Engineered can float over a sound deck, but honestly a good waterproof vinyl plank does that job better and costs less. We would rather tell you that than sell you a wood floor that is going to be unhappy in that structure.
Why narrow boards in a lakefront house?
Because wide boards move more. Every board expands and contracts with humidity, and the wider it is the more absolute movement happens at each joint — which is what produces visible gaps in winter and tight, cupped edges in summer. A lake house that gets closed up between visits swings further than a continuously conditioned one, so keeping the board width moderate is the simplest way to keep those changes from becoming visible.
Call nowFree quote