There is hardwood under my carpet. Is it worth refinishing?

Very often yes, and it is usually in better condition than people expect — the carpet protected it from thirty years of wear and sunlight. What we look at is the perimeter, where tack strip and staples do their damage, and whether any pad adhesive was used. Both are fixable. Pull a corner up in a closet and have a look before you commit to new flooring; a lot of Conroe houses are sitting on a floor worth restoring.

Can my engineered floor be refinished?

Only if the wear layer is thick enough, and many 2000s-era engineered floors are not. A two-millimetre veneer cannot take a sanding — the abrasive goes straight through to the core in the first pass, and then the board is finished. We measure before quoting rather than after starting. Where it is too thin, a screen-and-recoat can restore the finish without removing wood, and that is frequently the right answer.

Hardwood Refinishing in Conroe, TX

County: Montgomery County
Drive time from our base: 15 min from our Montgomery crews

Free measure in Conroe (713) 377-1303

What hardwood refinishing involves in Conroe

Refinishing work in Conroe clusters in two places. The first is the pre-war bungalows and mid-century houses near downtown, which are the only meaningful stock of genuinely old wood floors in the city — oak strip, generally, laid over a wood subfloor, and often hidden under carpet since the seventies. Pulling that carpet up is frequently the best day a Conroe homeowner has, because what is underneath is usually in far better shape than expected: the carpet protected it.

The caution in those houses is tack strip and staple damage around the perimeter, plus whatever the pad adhesive left behind. Old carpet pad that was glued rather than laid can leave a residue that has to come off completely — sanding through adhesive gums the abrasive and drags it across the floor, which is how you get a finish that will not cure evenly.

The second cluster is entirely different: engineered floors in 2000s-era subdivisions that owners want refreshed. This is where we have to have an honest conversation, because a great many of those floors have a two-millimetre veneer that cannot survive a sanding at all. We measure the wear layer before quoting. Where it is too thin, a screen-and-recoat is the only responsible option, and where the finish has already worn through to bare veneer in traffic lanes, the honest answer is that refinishing will not save it.

The job we run most here

Uncovering and refinishing 1940s oak strip flooring found under carpet in a downtown Conroe bungalow, including tack-strip repair around the perimeter.

What it costs in Conroe

Full sand and finish runs the standard range and takes three to five days including cure. Adhesive residue from old glued-down pad adds labor, since it has to be removed mechanically before sanding rather than sanded through.

What’s included

Stain, finish, and any replacement boards supplied — matched to your existing species and grade
Dust-contained sanding
Board replacement and repair
Custom stain matching
Waterborne or oil-modified polyurethane
Screen-and-recoat for floors that aren't ready for a full sand

Questions we get in Conroe

There is hardwood under my carpet. Is it worth refinishing?: Very often yes, and it is usually in better condition than people expect — the carpet protected it from thirty years of wear and sunlight. What we look at is the perimeter, where tack strip and staples do their damage, and whether any pad adhesive was used. Both are fixable. Pull a corner up in a closet and have a look before you commit to new flooring; a lot of Conroe houses are sitting on a floor worth restoring.
Can my engineered floor be refinished?: Only if the wear layer is thick enough, and many 2000s-era engineered floors are not. A two-millimetre veneer cannot take a sanding — the abrasive goes straight through to the core in the first pass, and then the board is finished. We measure before quoting rather than after starting. Where it is too thin, a screen-and-recoat can restore the finish without removing wood, and that is frequently the right answer.

All areasHardwood RefinishingThe full scope, materials, and gallery across every city we serve.All servicesFlooring in Conroe, TXEverything we install in Conroe, and what the housing stock here needs.